4sevens Maelstrom X10 XM-L LED
(enorme 32.000 Lux)

The Maelstrom X10 is a tactical duty light that features CREE's latest XM-L emitter for blinding output, two-stage output modes for simple versatility, and thermal regulation for guaranteed dependability.

The X10 is both current-regulated and thermally regulated - this means it can take serious abuse and be exposed to harsh conditions, but it will automatically control its output to protect its own guts. That means you don't worry about your light - you just use it.

The X10 also runs off one of our own special lithium-ion rechargeable batteries. It's called a 26650, and it packs enough energy to power the X10 at 640 lumens for an entire 1.8 hours.

Specifications

Gesamtlänge: 14,5cm

Diameter (Body): 33cm - Diameter (Head): 4,5cm
Weight (without battery): 5.6 oz
Material: Type-III Hard-Anodized Aircraft-Grade Aluminum
Lens: Hardened glass lens with sapphire coating on the outside and anti-reflection coating on the inside
Reflector: Highly polished smooth reflector

Note: The X10 reflector is removable, but it is very delicate. Never touch anything to the inside of the reflector, as it will permanently mar the polished surface.
Battery: One 26650 lithium-ion (Battery and battery charger NOT included)

Spannungs Arbeitsbereich: 3.0V ~ 4.2V
2 Lichtstufen:

Low: 100 lumens, 15 hours - High: 640 lumens, 1.8 hours

Water resistance: IPX-8
 
Operation

The Maelstrom X10 features a simple, two-mode interface that takes only a few seconds to master. To start, please make sure the X10 battery is inserted with the positive side (+) toward the head. Then, tighten the tailcap fully down and the X10 will turn on. Loosen the tailcap a half-turn, and the X10 will turn off.

The X10 tailcap has a pressure-style switch. When the tailcap is loosened a half-turn, simply press the button on the back to activate the light. The switching mechanism is momentary, which means when you stop pressing on the button, the X10 will turn off. To 'lock' the X10 on, simply tighten the tailcap fully down again.

To switch between the high and low output modes, turn the X10 off, and then turn it on again within 1 second. Anytime the X10 is turned on within 1 seconds of being turned off, it will automatically switch to the next mode. However, if you leave the X10 off for 2 seconds or longer, it will "memorize" the last mode used. See the examples below:

Example 1: ON (High mode) --- OFF (1 Second) --- ON (Low Mode) 
Example 2: ON (High mode) --- OFF (2 Seconds) --- ON (High mode)

Lieferumfang:

Maelstrom X10, Holster, Ersatz-O-Ringe; Bedienungsanleitung

das original Holster ist auf jeden Fall dabei! alternativ kann das Solarforce Holster dazubestellt werden! - trägt nicht so auf!

Optional: Ultrafire -Ladegerät und Akku (1 Satz = 1 Stk. Akku Typ 26650)
Wir liefern nicht mehr das original Ladegerät standartmäßig mit, sondern das Ultrafire WF-188. (Bild 6)
Das ist besser und hat mehr Möglichkeiten! Auf Wunsch gerne auch das original Ladegerät!

Achtung: die Lampe kann nur mit einem 26650er Akku betrieben werden!

auch batman hat sich für dieses Lichtschwert entschieden:

interessanter Review bei taschenundlampen.de

interessanter Rewiew auf CPF!