ZebraLight H31FW XP-G

entgegen den Fotos ist der GITD Ring am Gehäuse nicht dabei! (Foto ist von H31)

Spezifikation der Lampe:
 
LED: Cree XP-G Neutral White (color temperature 4200 K) 
User Selectable Modes: 3 (High, Medium and Low). Each mode can be configured to one of the two sub-levels. 
Light Output 
High: H1 180 Lm (0.9 hrs) or H2 98 Lm (2 hrs) / 4Hz Strobe 
Medium: M1 35 Lm (12 hrs) or M2 19.6 Lm (23 hrs) 
Low: L1 4.1 Lm (3.7 days) or L2 0.4 Lm (21 days) Light output are out the front (OTF) values. Runtime tests are done using Panasonic CR123A lithium batteries. Runtimes are usually much shorter with rechargeable RCR123 (16340) batteries, especially with protected 16340s that have higher discharge cut off voltage. 
Battery: One CR123A lithium primary or RCR123 Li-ion rechargeable.
Battery Shelf Life: Over 3 years under parasitic drain 
Beam Type 
90° spill beam spread

Dimensions 
Diameter: 23 mm
Length: 65 mm
Weight:
27.6 gram without battery or headband 

Features 
Electronic soft-touch switch, with a 200,000 cycle operating life 
Smart user interface provides fast and easy access to all brightness levels 
Precision machined casing from premium grade Alcoa aluminum bar stock 
Durable natural hard anodized finish (Type III Class I) 
frosted lens
Orange peel textured reflector 
Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain 
Waterproof to IPX8 

Operations 

This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes. 
Basic Operation 
Short click turns on the light to High or turns off the light. 
Long click (press and hold for about 0.6 seconds) turns on the light to Low. 
Advanced Operation and Configuration 
Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low. 
Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in. 
Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes. 
The second sub-level of the High can be configured after 6 double clicks. Double click (startng with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes. 


Lieferumfang:
•abnehmbarer Pocket Clip
•schwarzer Silicon Halter mit Kopfband
•2 O-Ringe

- CR123 Batterie

Die Lumenangaben sind vom Hersteller berechnete Werte der LED-Leistung.

Die aus der Lampe effektiv  austretende Lichtleistung (Torchlumen) ist geringer.

Die Lumenangaben und Laufzeitangaben  dienen der besseren Vergleichbarkeit der Lampen eines Herstellers untereinander.

Pb = Batterie/Akku enthält Blei Cd = Batterie/Akku enthält Cadmium Hg = Batterie/Akku enthält Quecksilber